600W Wind Charge Controller / wind regulator For 24V Wind Turbine Generator 600w Wind Charge Controller manufacturer from China Sun Gold Power Co,.Ltd

600W Wind Charge Controller / wind regulator For 24V Wind Turbine Generator

Payment Terms:	T/T,L/C;paypal
Place of Origin:	Guangdong, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: 600w Wind Charge Controller

Delivery Date: 10-30

wind charge controller: wind regulator

Means of Transport: Ocean,Air

Brand Name: http://www.sungoldpower.com...

1 Automatic dump load while the wind turbine generator overload.
2 Batteries overcharge protection.
3 Protect cable connect to batteries inverse.

The controller user's manual is suitable for 600W 24V wind turbine generator system.

1 Automatic dump load while the wind turbine generator overload.

2 Batteries overcharge protection.

3 Protect cable connect to batteries inverse.

4 Protect batteries charge to solar panel. at night

5. Protect electric shock.

Technical specifications :

Model	SG-W600
Rated voltage(V)	24V
Rated current of wind-generator(A)	18.5A
Battery over discharge protection voltage	21V
Battery over discharge recovery voltage	23V
Final charge voltage(V)	28.8V
Floating voltage(V)	26V
Recover time of braking	30min
Allowable ambient temperature (℃)	-2040
Dimension(mm)	208x140x74
Weight(g)	1500g

1.Installing steps

1.1 Panels:

1.1.1 Terminals in accordance with the upper part of the label, the right equipment connected to cable:

W1\W2\W3:Input terminals of wind turbine generator (Regardless of sequence);

S+:Means nothing S-:Means nothing B+:Batteries + B-:Batteries -

DC+:Means nothing -1 :Means nothin-2 :Means nothing

1.2 Installing steps

1.2.1Controller based on its protection level, housed in indoor and outdoor drying, ventilation, the controller may not be around the inflammable and explosive materials

1.2.2 Controller should be mounted vertically, hanging solid.

1,2,3 Unloading an external device, due to unloading, the equipment surface temperature will exceed 85 ℃, must be firmly placed on the location where not to be touched easily, meanwhile to maintain a well-ventilated, non-flammable, explosive goods.

1.2.4 Before wiring, to put the first wind turbine brakes manually switch to the ""position, when wiring to prevent electric shock accidents caused by running generators.

1.2.5 Check the wiring correct, to put the wind turbine brakes manually switch to the "O" position, equipment into operation

Security Warning: the boot before the battery must first access controller may not be the case without the battery running generator, or generating units and the controller will cause damage!

1.3 Running state, indicator function setting

1.3.1 Running indicators

Controller in operation mode, the indicator will show the different status of the operation of equipment, detailed in the table below:

Internal dump load	State	Explanation
L1\L2\L3(Green)	Lights	Full battery capacity
L1\L2 (Green)	Lights	Normal battery capacity
L1 (Green)	Lights	Low battery capacity
L1 (Green)	Blinks	Battery exhausted
(Green)	Lights	Wind turbine generator is working
≈ (Red)	Lights	Dump load
(Green)	Lights	Means nothing
(Green)	Lights	Means nothing

2.0 Notes

2.1 Ordering Information

2.1.1 Order should be detailed description of equipment configuration requirements, such as: generator sets parameters, the choice of external dump loading devices, protective grading, as well as overload protection.

2.1.2 Use under special conditions, can be customized in accordance with the usage conditions of users.

2.2 Installation Notes

2.2.1 Before accessing controller to confirm the system equipment, such as, wind turbine, batteries, lightning protection devices, cable selection configuration is correct, accurate installation.

2.2.2 Check-to-ground insulation resistance of equipment should be in line with the wind / light generating system of technical requirements.

2.2.3 Installation, disassembly, repair equipment, wind turbine will be sure to manually switch the brake to the "|" position.

3.0 After-sales service

3.1 Customers in the procurement, use, or for advice on the quality of this product can contact the designated distributors or with the company.