300W 24V Wind/Solar Hybrid Charge Controller LCD Display 00W 12V Wind/Solar Hybrid Charge Controller manufacturer from China Sun Gold Power Co,.Ltd

300W 24V Wind/Solar Hybrid Charge Controller LCD Display

Payment Terms:	T/T,L/C;paypal
Place of Origin:	Guangdong, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: 00W 12V Wind/Solar Hybrid C...

Delivery Date: 10-60

wind charge controller: Advanced Wind/Solar Hybrid ...

Means of Transport: Ocean,Air

Brand Name: http://www.sungoldpower.com...

hybid charger controller: 300w wind solar hybid charg...

PWM stepless unload mode
LCD display
Perfect protection function
Superior military-grade components
Voltage limiting and current-limiting charge

INTRODUCTION:

The advanced wind/solar hybrid controller is specially designed for wind system or high-end small-scale wind solar hybrid system, and especially suitable for wind/solar hybrid street light system& wind/solar hybrid monitoring system.The controller can control wind turbine or wind turbine and solar panel at the same time and transform the wind&solar energy into electricity for the DC load use, with excess energy stored into batteries. Varieties of appearance and function design, which is flexible to meet the requirements of different customers.

when you are buying it, pls choose what's kind of your wind turbine ? three phase AC output, single phase DC output or single phase AC output ? we will send the exact controller to you.

PERFORMANCE FEATURES:

- Superior military-grade components to ensure the product stability.

- Perfect protection function, thus the system has higher reliability.

- Check and set all operation parameters as requirement from LCD display.

- Voltage limiting and current-limiting charge mode, ensures battery in the best charging status.

- Two DC Load output, light-control, time-control, constant output, and multiple output control mode selection.

- PWM stepless unload mode, which burn the excess power into dump load, making the battery charging in best status.

- Design of high quality aluminum alloy appearance, with small size and good cooling effect.

- European CE certification.

TECHNICAL PARAMETERS:

Model	SG-WCL30024
Rated Battery Voltage	24V
Rated Wind Turbine Power	300W
Wind Turbine Maximum Input Power	450W
Rated Solar Power	150W
Dumpload Start Voltage(factory default)	27V
Charge Shutoff Voltage(factory default)	29V
Wind Turbine Brake Current	13A
Battery Over Discharge Protection Voltage	21.6V
Battery Over Discharge Recovery Voltage	24V
Output Over Voltage Protection	32V
Light Control On Voltage (Factory Default)	Adjustable(2V)
Light Control Off Voltage (Factory Default)	Adjustable(3V)
Load 1 Rated Output Current	10A
Load 2 Rated Output Current	10A
Load 1 Output Mode(Factory Default)	3 Modes Selection(Light-Control On and Light-Control Off)
Load 2 Output Mode(Factory Default)	3 Modes Selection(Light-Control On and Time-Control 5 hours Off)
Control Mode	PWM
Display Mode	LCD
Display Parameters	Wind Turbine Power, Wind Turbine Voltage, Wind Turbine Current, PV Voltage, PV Charge Current, PV Power, Battery Voltage, Over Voltage, Under Voltage, Over Load, Short Circuit, Night. Etc
Working Temperature & Humidity	-20~+55℃/35~85%RH(Without Condensation)
Temperature Compensation(optional)	-4mV/℃/2V ,–35℃--+80℃, Precision:±1℃
Communication Mode(optional)	RS232\RS485\RJ45\GPRS. Etc
Quiescent Current	≤20mA
Protection Function	Solar reverse charge protection , Solar reverse connection protection, Battery over charge protection, Battery over discharge protection, Battery reverse connection protection, Lightning protection Wind turbine current limiting, Wind turbine automatic brake and manual brake.
Optional Function	Optional Function 1 : RS Communication and Matched Software . Install the matched software to computer and connect controller with Computer Via software. User can adjust parameters from software by themselves. User can know the state of whole system Via software. All data will be stocked into excel files from software.(add USD:85)
Optional Function	Optional Function 2: Low Voltage Charge Function. With this function Controller can start charging battery when wind turbine voltage is lower than battery bank voltage , For example ,Controller can start charging battery from 2V if runs in 12V battery bank(add:USD:130 with function 1)
In order to serve our customers better. Our company can adjust parameters configuration according to customer's requirement.